K110-SA
WINEN IMM
| DESCRIPTION | UNIT | K110-SA | ||
| International size rating | 350 | |||
| INJECTION UNIT | A | B | C | |
| Screw diameter | mm | 32 | 36 | 40 |
| Screw L:D ratio | L/D | 22.5 | 20.0 | 18.0 |
| Shot volume | cm3 | 145 | 183 | 226 |
| Shot weight(PS) | g | 132 | 167 | 206 |
| oz | 4.6 | 5.9 | 7.3 | |
| Injection pressure | Bar | 2393 | 1890 | 1531 |
| Injection rate | cm3/s | 88 | 111 | 137 |
| Plasticizing capacity | g/s | 11 | 18 | 28 |
| Max.screw speed | r/min | 327 | ||
| CLAMPING UNIT | ||||
| Clamping force | kN | 1100 | ||
| Space between tie bars | mm | 410x360 | ||
| Space between tie bars | mm | 590x540 | ||
| Opening stroke | mm | 350 | ||
| Min.mold height | mm | 150 | ||
| Max.mold height | mm | 400 | ||
| Distance between platens(daylight) | mm | 750 | ||
| Ejector stroke | mm | 110 | ||
| Ejector force | kN | 40 | ||
| Number of ejector | 5 | |||
| POWER UNIT | ||||
| Systerm pressure | Bar | 175 | ||
| Pump motor | kW | 15 | ||
| Heating capacity | kW | 6.3 | ||
| GENERAL | ||||
| Oil tank capacity | L | 150 | ||
| Machine dimension( LxWx H) | mxmxm | 4.2x1.1x1.8 | ||
| Machine weight | t | 3.6 | ||
| Hopper capacity | kg | 25 | ||
扫描二维码分享到微信
