K150-SA
WINEN IMM
| DESCRIPTION | UNIT | K150-SA | ||
| International size rating | 430 | |||
| INJECTION UNIT | A | B | C | |
| Screw diameter | mm | 36 | 40 | 45 |
| Screw L:D ratio | L/D | 22.2 | 20.0 | 17.8 |
| Shot volume | cm3 | 204 | 251 | 318 |
| Shot weight(PS) | g | 185 | 229 | 289 |
| oz | 6.5 | 8.1 | 10.2 | |
| Injection pressure | Bar | 2154 | 1745 | 1378 |
| Injection rate | cm3/s | 98 | 120 | 152 |
| Plasticizing capacity | g/s | 14 | 22 | 29 |
| Max.screw speed | r/min | 258 | ||
| CLAMPING UNIT | ||||
| Clamping force | kN | 1500 | ||
| Space between tie bars | mm | 460x410 | ||
| Space between tie bars | mm | 660x610 | ||
| Opening stroke | mm | 400 | ||
| Min.mold height | mm | 170 | ||
| Max.mold height | mm | 480 | ||
| Distance between platens(daylight) | mm | 880 | ||
| Ejector stroke | mm | 130 | ||
| Ejector force | kN | 50 | ||
| Number of ejector | 5 | |||
| POWER UNIT | ||||
| Systerm pressure | Bar | 175 | ||
| Pump motor | kW | 15 | ||
| Heating capacity | kW | 7.5 | ||
| GENERAL | ||||
| Oil tank capacity | L | 150 | ||
| Machine dimension( LxWx H) | mxmxm | 4.4x1.2x1.9 | ||
| Machine weight | t | 4.4 | ||
| Hopper capacity | kg | 25 | ||
扫描二维码分享到微信
